Advantages of Installing a Satellite Dish For Your Television

Having a satellite dish installed on your home TV will give you a clear picture of what’s on TV. The signals from a satellite dish are digital, so there is little chance of interference and a drop in signal. The signal is also much stronger than cable TV, so you won’t need to watch your favorite shows on an antenna.


The cost of installing a satellite dish depends on various factors, including the number of televisions you plan to connect to the dish. The additional cost of dish installation Louisville, KY an extra-large dish may be as much as $50, and there may be additional charges for removing and disposing of the old dish. 

To save money, consider purchasing a lightweight satellite dish that is easy to transport. These dishes are usually more expensive than standard satellite dishes. You must also consider the cost of a mast or bracket to mount the satellite dish and the clearance required for receiving a signal. 

Satellite installation costs include labor, setup, mobilization, and minimum hourly charges. Other costs include bringing an existing system into compliance with current building codes, hazardous materials testing, and general contractor overhead. You can also expect to pay sales tax and permit fees.


Almost anywhere in the world can receive satellite TV signals if you have the right satellite dish antenna. However, only certain areas have access to cable and Internet connectivity, so if your home is located outside of these service areas, you won’t be able to use these services.

Various Options

Viewers can access all television channels and shows on geostationary satellites through satellite dishes. This includes premium and international entertainment channels that are typically difficult to access through other signal distribution methods, such as terrestrial broadcasting, also known as cable TV.

Reception Quality

A successful satellite installation requires that the dish be situated in an area with a clear view of space. The satellites orbiting the Earth are 36,000 kilometers from the ground, so the dish must be positioned to receive the best possible signal. It must also be installed at the proper inclination, with proper skew and horizontal adjustments. To determine the best alignment, engineers use signal meters. These devices use the position of the nearest signal tower to pinpoint the best location.

To get the best reception, the dish should face south. The opposite is true if the satellite is pointed north. The location must also be free of obstructions. Once the dish is mounted, it is connected to the receiver using coaxial cables. The installation process usually requires a trench to place the cables.

After the satellite dish is installed, the next step is to adjust the height and alignment of the unit. Depending on where you live, you can place it at eighty to a hundred feet. A satellite dish with a low inclination will not give a good reception and will have a poor signal.